Caraudio

Ultra-compact 4 channels amplifier... 

250 mm (10’’) extra-slim subwoofer... 

BLAM Signature -malliston 4″ erillissarja Mercedes Benziin. 

BLAM Signature -malliston 4″ erillissarja, erityisesti Mercedes Benz C, E ja GLC -malleihin. 

Päivitetty versio BLAM:n suosituimmasta erillissarjasta. 

More details 

BLACK HYDRA HBA-4.130 IS FOCUSED ON UNCOMPROMISING SQ-AUDIO SYSTEMS, IT IS AN ALLOY OF HONED TO PERFECTION TECHNICAL SOLUTIONS IN THE DESIGNING OF AB-CLASS CIRCUIT BOARDS WITH APPLICATION OF THE HIGHEST-LEVEL COMPONENTS. THE MODEL HAS A COMPLETELY SYMMETRICAL LAYOUT AND CONSISTS... 

3-WAY SET OF CAR ACOUSTICS SERIES BETA OF HBC-3.28, CONSISTS OF LOW FREQUENCY SPEAKER OF CALIBRE 16 CM, MIDRANGE SPEAKER 75 MM, AND TWEETER WITH DIAMETER OF THE RADIATING DOME OF 28 MM. EACH LINK HAS FEATURES, MOST AIMED AT THE OPTIMAL DIVISION OF THE AUDIBLE RANGE INTO THREE BANDS, WITH... 

BLACK HYDRA HDA-4.90 WILL APPEAL TO A WIDE RANGE OF CAR AUDIO ENTHUSIASTS WHO PAY SPECIAL ATTENTION TO THE SOUND QUALITY OF THEIR SYSTEM. SLIGHTLY LESS THAN HGA-4.100'S OUTPUT POWER ALLOWED TO MAKE THE AMPLIFIER MORE AFFORDABLE WHILE MAINTAINING THE GENERAL NATURE OF THE SOUND. BUT... 

2-WAY COMPONENT SPEAKERS OF DELTA SERIES - HGC-2.25, HAS ALL THE MAIN POSITIVE PROPERTIES OF THE HBC-3.28 AND HGC-2.28 SERIES RELATING TO LOW FREQUENCY LOUDSPEAKERS OF 16 GAUGE. WOOFER CONE MADE OF THERMALLY DRIED PULP WITH A SPECIAL IMPREGNATING COMPOSITION, WHICH REDUCES THE... 

BLACK HYDRA HGA-4.100 IS A REAL HIGH END, BUT IN A MORE AFFORDABLE BUDGET THAN THE TOP-END SERIES. THE AMPLIFIER IS BUILT ON TRADITIONAL CIRCUIT BOARD SOLUTIONS OF THE AB-CLASS. BY CAREFUL SELECTION OF COMPONENTS WE HAVE MANAGED TO ACHIEVE AN AMAZING COMBINATION OF LIGHTNESS AND... 

IN THE LINE OF CAR SPEAKERS, ALONG WITH THE FLAGSHIP 3-WAY VERSION OF HBC-328 THERE IS SUBMITTED TWO-WAY MODEL OF GAMMA SERIES - HGC-228, NO INFERIOR TO "BIG BROTHER" IN THE SOUND QUALITY. THE LF LINK IS A SPEAKER OF THE CALIBRE OF 16 CM WITH A SMOOTH FREQUENCY RESPONSE IN THE... 

THE LOW-FREQUENCY SPEAKER HGS-2521 IS BUILT IN FULL COMPLIANCE WITH THE PRINCIPLES OF UNCOMPROMISING SQ SUBWOOFERS - A COMBINATION OF A STRONG "MOTOR" AND A LIGHTWEIGHT CONE FROM A RIGID CELLULOSE COMPOSITE. POWERFUL DIE CAST FRAME (BASKET) ELIMINATES ANY POSSIBILITY OF PARASITIC... 

The BRAVO BASS FLEX line was developed for those looking for performance and versatility, allowing the use of several loudspeakers with a wide variety of impedances. Its automatic impedance detection system automatically adjusts the product’s audio output to optimize efficiency and... 

TECHNICAL SPECIFICATIONS
CHARACTERISTICS BRAVO FULL 8000 – 1 OHM
Number of Channels 1
RMS Power 8000W RMS
RMS Power at... 

TECHNICAL SPECIFICATIONS
CHARACTERISTICS BRAVO FULL 8000 – 2 OHMS
Number of Channels 1
RMS Power 8000W RMS
RMS Power at... 

  

TECHNICAL SPECIFICATIONS CHARACTERISTICS BRAVO FULL 3000 – 2 OHMS Number of Channels 1 RMS Power 3000W RMS RMS Power at 2 Ohm 12.6V 3000W RMS RMS Power at 4 Ohm 12.6V 1700W RMS RMS Power at 2 Ohm 14.4V 3900W RMS RMS Power at 4 Ohm 14.4V 2200W RMS Supply Voltage 9V ~ 16V DC Frequency Response... 

CHARACTERISTICS BRAVO FULL 5000 – 1 OHM Number of Channels 1 RMS Power 5000W RMS RMS Power at 1 Ohm 12.6V 5000W RMS RMS Power at 2 Ohm 12.6V 2800W RMS RMS Power at 1 Ohm 14.4V 5300W RMS RMS Power at 2 Ohm 14.4V 3300W RMS Frequency Response 10Hz ~ 12KHz Crossover Low Pass 90Hz ~ 12KHz... 

CHARACTERISTICS BRAVO FULL 5000 – 2 OHMS Number of Channels 1 RMS Power 5000W RMS RMS Power at 2 Ohm 12.6V 5000W RMS RMS Power at 4 Ohm 12.6V 2600W RMS RMS Power at 1 Ohm 14.4V 5300W RMS RMS Power at 2 Ohm 14.4V 3000W RMS Supply Voltage 9V ~ 16V DC Frequency Response 10Hz ~ 12Khz Crossover... 

Look picture... 

6m Self-adhesive sealing tap... 

2mm polymer-layered damping mat... 

11m Sealing butyl cord... 

CTK Dominator is a “hardcore” range of mats for the most demanding professionals who do not compromise. 

Soundproofing a pair of car doors... 

10mm damping mats... 

6mm damping mats... 

6mm aluminium foil layer damping mats... 

7,5mm Soundproofing material... 

5,5mm Soundproofing material... 

2kg anticorrosive and soundproofing mastic... 

2mm butyl composite damping mat... 

2,2mm aluminum / butyl damping mat... 

3mm aluminum / butyl damping mat... 

4mm aluminum / butyl damping mat... 

Butyylikumikomposiitti vaimennusmatto... 

7,5mm Soundproofing material... 

2mm aluminum / butyl damping mat... 

15mm polyurethane damping mat... 

35mm polyurethane damping mat... 

35mm polyurethane damping mat... 

More details 

More details 

DBVox 1 power block... 

Bass box for those who are looking for extreme deep bass. It is designed for many people who want to be able to play straight down to 20hz in the car. The box has a volume of 130L net with a tuning of 28hz... 

Bass box for those who are looking for extreme deep bass. It is designed for several elements that want it to be able to play straight down to 20hz in a car. The box has a volume of 75L net with a tuning of 32hz... 

Empty box for installing 2×10″ Subwoofers up to 6000W RMS. Material: 28mm MDF Dimensions: H40CM x W95cm x D46cm... 

Empty box for installing 2×12″ Subwoofers up to 3000W RMS. Material: 19mm MDF... 

Empty box for installing 2×12″ Subwoofers up to 3000W RMS. Material: 17mm MDF... 

2x10" MDF Svart 2x30L Basreflex 30cm 76cm 43cm... 

Empty box for installing 2×8″ 

dBVox Raggarplanka with Phase Sound for 4 x 8" speakers Constructed from robust 19mm MDF with a center-mounted slot port for maximum sound reproduction. Tuned to 90Hz. 

High-performance maintenance-free battery. 12V 70AH (CCA 800) L: 270mm W: 165mm H: 190mm Weight 21kg... 

7 element 600 х 530 mm – 130 х 158 mm... 

5 element 840 х 330 mm – 348 х 67 mm... 

Adjustable Smart Template Axis Shape Creator for milling can be used in car audio, furniture production, and other manufactures. Manufactured with ABS Plastic 6 mm. “Beginner” package includes: Organaizer/hardware tray, 1 pc. (1 tray contains 8 pairs of set: 1 screw+1 plastic washer+ 1... 

4 element 833 х 307 mm – 307 х 115 mm... 

DBVox Contact sapluunat... 

9 element 850 х 580 mm – 337 х 68 mm... 

8 element 800 х 600 mm – 352 х 65 mm... 

7 element 800 х 450 mm – 285 х 66 mm... 

9 element 600 х 300 mm – 170 х 44 mm... 

Adjustable Smart Template Axis Shape Creator for milling can be used in car audio, furniture production and other manufactures. Manufactured with ABS Plastic, thickness 6mm. Width 40 mm. “Enthusiast” package includes: Organaizer/hardware tray, 2 pc. (1 tray contains 8 pairs of... 

5 element 800 х 400 mm – 470 х 140 mm... 

5 element 346 х 400 mm – 90 х 102 mm... 

3 element 600 х 400 mm – 390 х 160 mm... 

7 element 800 х 450 mm – 265 х 42 mm... 

6 element 914 х 304 mm – 152 х 50 mm... 

6 element 400 х 400 mm – 88 х 88 mm... 

8 element  933 х 500 mm – 230 х 56 mm... 

Adjustable Smart Template Axis Shape Creator for milling can be used in car audio, furnirure production and other manufactures. Manufactured with ABS Plastic, thickness 6mm. Width 40mm. “Pro” package includes: Organaizer/hardware tray, 2 pc. (1 tray contains 8 pairs of set: 1 screw+1 plastic... 

4 element  835 х 342 mm – 230 х 150 mm... 

5 element 800 х 400 mm – 470 х 144 mm... 

5 element  700 х 400 mm – 200 х 110 mm... 

7 element  580 х 700 mm – 153 х 195 mm... 

5 element  457 х 203 mm – 152 х 50 mm... 

3 element  480 х 200 mm – 320 х 74 mm... 

5 element  800 х 485 mm – 544 х 230 mm... 

4 element 400 х 275 mm – 120 х 95 mm... 

Including 4 cells... 

5 element 700х400 mm – 274х110 mm... 

10 element Ø546 mm – Ø82 mm... 

1006-D4 - HiDef Tuned 6.5″ 250w RMS Dual 4.0... 

New 100a Series Woofers Are Optimized For High Efficiency Output In a Ported Enclosures. 

Digital Designs DD1506-D2 ESP 6.5“ Subwoofer... 

Digital Designs DD1506-D2 ESP 6.5“ Subwoofer... 

8″ Subwoofer... 

8″ Subwoofer... 

10″ Subwoofer... 

10″ Subwoofer... 

12″ Subwoofer... 

12″ Subwoofer... 

10″ Subwoofer... 

12″ Subwoofer... 

Digital Designs 3510 DVC 2 10“ Subwoofer...