This converter is designed for use with factory radios in cars without RCA low level output. HLC4.2 is designed to work with all head units thanks to fully balanced noise rejecting input circuits. The converter can be used for both 2 -and 4 -channel amplifiers and have up to 3v output to minimize noise in amp input section.
- Number of channels: 4
- Power supply: 12 V DC (min 10,8, max 15,6V)
- Current draw, no signal: 4 mA
- Current draw, operational: Typical 25 mA
- Output voltage: 3 V RMS
- Distortion: 0,002% THD @ 3V output, 10 kohm load
- Clip point: 3,7 V RMS @ 14,4 V power supply
- Output impedance: 200 ohms nominal
- Input impedance: Ch. 1: 44 ohms, Ch. 2-4: 100 ohms, All channels are fully balanced
- Sensing modes: DC level or Audio, both operate on Ch. 1 only.
- Remote output: 12 Volts, max 100 ma max, protected against short term short circuit
- Indicators: Green= Remote on, Blue = Audio sensing active
- Reverse polarity protected.Summing output ch 3 + 4 for subwoofer amp when used with optional EBC
